At present, the selection and use of gas booster pump should pay attention to the quality problem. When the operation is carried out again, the design of each pipeline or the design of each work process is very key and necessary. In the process of selection and design, the steel of the high-pressure part is stainless steel, and its material is stainless steel, which adopts double-layer seal, In this way, in the process of design, people can achieve higher efficiency according to some specific use environment or some adjustment conditions. Now, designers will pay more attention to the selection and use of various equipment or some specific problems, but some of his career work is also very critical in the process of manufacturer design, Some of his working conditions should be tested in advance. Now the rapid development of intelligence can make the production design of these equipment more and more advanced, and can achieve better results for some problems or specific design conditions. Therefore, now many people are choosing equipment or comparing them, We will pay close attention to the specific conditions of these booster pumps. The ranking list of supercharger can be used to compress air and other gases, and the output air pressure can be steplessly adjusted by driving air pressure.
The so-called gas booster pump, also known as gas booster pump, pneumatic booster pump and gas booster valve, is a device that increases the pressure of gas on the surface. This is a relatively white translation, but there is no big difference between the professional explanation of Dongguan saisente and the literal explanation, Our standard explanation is that the gas booster pump / air booster pump compresses the air through the action of the piston. The gas pipeline booster pump has the following characteristics: simple maintenance: the booster pump has few parts and seals, simple maintenance and low cost, so it can re pressurize together. High cost performance: booster pump has the characteristics of high output performance and low cost. Strong adjustability: the output pressure and flow of booster pump are accurately regulated by the pressure regulating valve of driving gas. Adjust the driving air pressure so that the output pressure of the booster pump of the air pressure pipeline can be accurately adjusted between the pre increased air pressure and the relatively large output pressure. High output pressure: the relatively high working pressure of pneumatic liquid pipeline booster pump can reach 700MPa, and the relatively high working pressure of pneumatic gas pipeline booster pump can reach 300mpa. Excellent material: the high-pressure part of booster pump is made of hard aluminum alloy. The high-pressure plunger is made of stainless steel. And adopt double-layer sealing. The materials of key parts can be selected according to the medium. Various gas drives: compressed air, nitrogen, steam, etc.
Gas booster pump is one of the pneumatic booster pumps. It is used to boost the pressure. There are many kinds of gas booster pumps, such as oxygen booster pump, air booster pump, nitrogen booster pump and so on. The gas booster pump is made of stainless steel, because its material is hard. Now let's introduce the working principle of the gas booster pump. A variety of gas drives: compressed air, liquefied nitrogen, pipeline nitrogen and water vapor. Large output flow: just. Automatic pressure maintaining: when working, it works back and forth rapidly. As the output pressure approaches the set pressure value, the reciprocating speed of the pump slows down until it stops. And maintain this pressure. At this time, the energy consumption is very small, no heat is generated, and no parts move. When the pressure balance is broken, the pneumatic booster pump automatically starts to work to the next balance. Excellent material: the high pressure part is made of stainless steel. The high-pressure plunger is made of stainless steel and adopts double-layer seal.
Simple maintenance: the pneumatic booster pump has few parts and seals, simple maintenance and low cost. All "O" rings of the same series of pumps and vulnerable parts of the maintenance kit can be replaced with each other, greatly reducing the maintenance cost. The pneumatic booster pump has been filled with lubricant before delivery, and external lubrication is not required during operation. Maintain hydraulic pressure without energy consumption 2. It has explosion-proof function and does not need power or wire connection 3. It is safe 4. It has small structure and light weight and is not affected by weather changes 5. It is easy to realize automatic control 6. Anti pollution 7. The output static pressure is adjusted by the driving air pressure 8. The output pressure reaches 80000psi 9. It is very easy to start and stop operation at full load 10. It is easy to install. Gas booster pump when the pressure between the driving part and the output liquid part reaches balance, the booster pump will stop running and no longer consume air.
Gas liquid booster pump http://www.transgenx.com Focus on providing services for you. Please remember to pay attention to us for more wonderful contents. We sincerely provide services for you